All articles
Release Strategy

Music Release Checklist: A Step-by-Step Timeline for Independent Artists

Music release checklist: vinyl record playing on a turntable

A release does not happen on release day. It happens in the four to six weeks before it, in a long list of small jobs that are easy to forget. This music release checklist breaks those jobs into a timeline you can follow for every single, EP, or album, so release day becomes a celebration instead of a scramble.

Use it as written, or copy the tasks into your planner. If you use MuziTask, each item below maps neatly to a one-off or recurring task tied to your release countdown.

Key takeaways

  • A release is built in the four to six weeks before release day, not on the day itself.
  • Lock the date early, then work backwards from it with dated tasks.
  • Get credits, splits, and metadata right before you deliver. Errors are much harder to fix after launch.
  • Deliver to your distributor early so you have time to pitch to editorial playlists.
  • Run a pre-save campaign and post teaser content for two to three weeks before release.
  • Plan content and outreach for the weeks after release, not only before it.
  • Write down what you learned after every release, so the next one starts ahead instead of from zero.

Why you need a music release checklist

Independent artists are the label. That means you are also the project manager, the marketing team, and the person who remembers to upload the lyrics. Without a checklist, a few things tend to happen:

  • The song is delivered to the distributor too late to pitch it to playlist editors.
  • Artwork, credits, or metadata contain errors that are hard to fix after launch.
  • Content starts on release day instead of building anticipation in the weeks before.
  • Nobody follows up after the first 48 hours, which is exactly when momentum needs help.

A checklist fixes all four by turning the release into a sequence of small, dated tasks.

The release timeline at a glance

WhenFocus
6 or more weeks beforeFinish the music, lock the date, plan the campaign
4 to 5 weeks beforeDeliver to your distributor, prepare assets, pitch
2 to 3 weeks beforePre-save campaign, teaser content, outreach
Release weekLaunch, post, engage, share
1 to 4 weeks afterFollow up, measure, keep the song alive

The exact lead times depend on your distributor and the platforms you target. Always check your distributor’s own recommendations, then work backwards.

Phase 1: Six or more weeks before release

Finish and approve the music

  • Final mix approved.
  • Master approved and exported in the formats your distributor requires.
  • Clean and explicit versions prepared if the song needs both.
  • Instrumental or alternate versions exported if you plan to use them.

If you struggle to call a song done, our guide on how to finish songs has practical ways to get from almost there to finished.

Lock the release date

Pick a date and commit to it. Many artists release on Fridays because that is the global release day used by the industry, but what matters most is that the date is fixed and realistic for your workload.

Once it is set, put it in your planner. In MuziTask, the release timeline counts down to your next drop based on the pace you choose, so you always know how many days are left.

Collect credits and metadata

  • Song title spelled exactly as it should appear.
  • Primary artist, featured artists, and their exact profile names.
  • Songwriters, producers, and other contributors.
  • Genre and subgenre.
  • Release language and explicit content flag.
  • ISRC codes if you already have them, or let your distributor assign them.
  • Splits agreed in writing with every collaborator.

Getting this right now saves a lot of pain later. Wrong metadata can send your song to the wrong artist profile.

Register the song

If you are a songwriter, register the composition with your performing rights organization, such as ASCAP or BMI in the United States, or the equivalent in your country. This is how you get paid performance royalties.

Plan the campaign

Decide what the campaign will include before you start making assets:

  • Cover art.
  • Short video teasers.
  • A pre-save link.
  • Lyric video or visualizer, if you want one.
  • A list of blogs, curators, and creators to contact.

Our music marketing plan guide explains how to build the full campaign around your release.

Phase 2: Four to five weeks before release

Deliver to your distributor

Upload the audio, artwork, and metadata. Delivering early gives the platforms time to process the release and gives you time to pitch.

Prepare the artwork

  • Square cover image at the resolution your distributor requires.
  • No blurry text, no web addresses, and nothing that breaks platform rules.
  • Versions cropped for stories, banners, and thumbnails.

Pitch to editorial playlists

Once your song appears as an upcoming release in your dashboard, pitch it. Spotify for Artists lets you pitch one unreleased song to its editorial team ahead of release. Spotify also notes that pitching an upcoming song makes it eligible for your followers’ Release Radar, which you can read about in its Release Radar guide. Apple Music has its own tools in Apple Music for Artists.

In your pitch, be specific: genre, mood, instruments, the story behind the song, and any marketing you have planned.

Update your profiles

  • Fresh artist photo and bio on streaming platforms.
  • Bio and link in bio updated on social profiles.
  • Website or landing page ready for the new release.

Phase 3: Two to three weeks before release

Launch the pre-save campaign

A pre-save lets fans add the song to their library before it comes out, so it shows up for them on release day. Share the link everywhere and repeat it more than you think you need to. For ways to make it more than “please pre-save,” see our pre-save campaign ideas.

Spotify also offers Countdown Pages for eligible releases, which give fans a place to pre-save and preview what is coming.

Start teaser content

Post consistently in the weeks before release. Ideas that work well:

  • A short clip of the hook.
  • The story of how the song started.
  • Behind the scenes in the studio.
  • A reveal of the cover art.
  • A countdown post every few days.

Turning this into a recurring task, for example “Post teaser, daily,” is the simplest way to stay consistent. Our list of content ideas for musicians gives you more formats.

Reach out

  • Email or message blogs and curators who cover your genre.
  • Send the song to creators who might use it in their videos.
  • Tell your collaborators the date so they can share it too.
  • Message your most engaged fans personally.

Keep a simple list of who you contacted and when, so you can follow up once, politely.

Phase 4: Release week

Release day checklist

  • Confirm the song is live on all major platforms.
  • Update every link in bio to the new release.
  • Post the announcement on every channel.
  • Share stories, and reshare fans who post about it.
  • Send a short message to your mailing list if you have one.
  • Thank everyone who helped.

In MuziTask, this is the moment you tap Released It! The countdown resets for your next release, and you keep building XP toward your next level.

The rest of release week

  • Reply to every comment and message you can.
  • Post a different piece of content each day.
  • Check your dashboards for early playlist adds and listener locations.

Phase 5: One to four weeks after release

The release is not over after day one. The weeks after are where many songs find their audience.

Keep content going

  • Post performance clips, acoustic versions, or reactions.
  • Share any playlist adds or press as social proof.
  • Start a challenge or trend around a part of the song.

Follow up with outreach

  • Send one polite follow-up to curators who did not reply.
  • Share your release with new contacts you met during the campaign.

Measure and learn

Write down a few numbers and observations a week after release, and again a month after:

  • Streams and saves.
  • Playlist adds.
  • Which content performed best.
  • Where listeners came from.

Then note what you would change next time. That note is the most valuable part of the checklist, because it makes the next release better.

Turn the checklist into a repeatable system

A checklist is most powerful when you use it every time. Here is how to make it automatic:

  1. Set a release pace. Weekly, biweekly, monthly, or custom. If you are not sure, read how often should you release music.
  2. Split tasks into one-offs and rituals. Delivering to the distributor happens once per release. Posting content happens daily.
  3. Give every task a frequency. In MuziTask, each task can be daily, weekly, or monthly, so “Post TikTok,” “PM for collabs,” and “Run Pre-Save Campaign” all live in one list with the right rhythm.
  4. Review every week. Use the weekly review to check how many days are left and what still needs to happen.

A printable version of the essentials

Copy this short list into your notes for every release:

  • Mix and master approved
  • Release date locked
  • Credits, splits, and metadata confirmed
  • Song registered with your PRO
  • Delivered to distributor
  • Artwork in all formats
  • Editorial pitch sent
  • Profiles updated
  • Pre-save live and shared
  • Teaser content scheduled
  • Outreach sent
  • Release day posts done
  • Follow-ups sent
  • Results recorded and lessons noted

Adapting the checklist for an EP or album

Everything above applies to a single. A longer project needs the same steps with more time and a few extra decisions.

Choose your focus tracks

You usually cannot push every song on an EP or album equally. Pick one to three focus tracks and build the campaign around them. Some artists release one or two of those tracks as singles before the full project, so each one gets its own pitch window and content cycle.

Extend the timeline

For an EP, add a few weeks to every phase. For an album, many independent artists plan two to three months ahead, especially if they release singles first. Write the dates down as soon as the project is finished, then fill in the tasks between them.

Plan content for every track

Fans need a reason to listen beyond the focus tracks. Give each song at least one dedicated piece of content: a lyric snippet, a story about the writing session, or a short performance. Spreading this across the weeks after release keeps the whole project alive.

Double check track order and metadata

With more songs, there is more room for error. Check every title, featured artist, explicit flag, and credit line one by one before you deliver. Ask a collaborator to check them too. A second pair of eyes catches the mistakes you have stopped seeing.

Budget your energy

A long campaign is a marathon. Instead of trying to post five times a day for three months, set a pace you can keep, such as one post a day and one bigger piece of content a week. In MuziTask, setting those as daily and weekly tasks makes the pace visible, and the XP you earn for each one turns a long campaign into a series of small wins.

Common release mistakes to avoid

Releasing as soon as the song is finished. The excitement is understandable, but skipping the lead time means skipping the pitch, the pre-save, and the teasers.

One post and done. A single announcement on release day reaches a fraction of your audience. Plan several weeks of content.

Inconsistent names and credits. Make sure every collaborator’s artist name matches their existing profile exactly.

No plan for week two. Have content and outreach planned for after release, not only before.

Not writing down what you learned. Without notes, each release starts from zero.

Frequently asked questions

How far in advance should I plan a music release?

Aim for at least four to six weeks between delivering to your distributor and release day for a single, and longer for an EP or album. That gives you time to pitch, run a pre-save, and build content.

What should be on an independent music release checklist?

The essentials are finished audio, a fixed date, correct metadata and credits, PRO registration, distribution, artwork, an editorial pitch, a pre-save campaign, teaser content, outreach, release day posts, and follow-up after release.

What day should I release music?

Many artists release on Fridays because it is the standard global release day. Choose a day you can support with content and promotion, and stick to it.

Do I need a pre-save campaign for a single?

It is not required, but it is one of the easiest ways to give your release a push on day one, because pre-saves add the song to fans’ libraries automatically when it comes out.

How can I keep track of all these release tasks?

Put every task in a planner with a date or frequency. A task manager for musicians like MuziTask adds a release countdown, recurring tasks, and progress tracking so you can see what is left at a glance.

Ready for your next release?

A good release is a series of small, boring tasks done on time. The checklist makes them visible, and a planner keeps them moving.

Download MuziTask on the App Store or Google Play, set your release pace, and let the countdown guide your next drop. For more release and productivity guides, browse the MuziTask blog.

Build the habit. Ship the music.

MuziTask is live on the App Store and Google Play. Download it and start building your release ritual today.